| |
BC1 |
$2.00 |
Tiller and Tillerman |
|
 |
BC2 |
$12.00 |
8 Unpainted Rowers
and Oars (25mm)(Insert not included) |
|
 |
BC3 |
$10.00 |
Unpainted Resin Rowboat. (25mm)
Resin is very light and durable and not easily broken. |
|
 |
BC4 |
$3.00 |
Unpainted Resin removable
boat Interior. Illustrated by photo at the left. |
|
| |
WC-200 |
$1.60 |
Controls for VSF ships |
|
Painted
by Ken Hafer |
CC1 |
$75.98 |
The CloudCutter: Designed
by Herb Gundt of H.G. Walls. Can be
used for Space 1889. Consist of 3 pieces; lower hull, hull and deck, and
stern piece. It is about 13" long, 4" wide, and 4-5
1/2"tall, depending on stern decoration. It weighs about 30 oz. Comes unpainted.
|
|
Painted by
Ken Hafer
|
ICG1 |
$89.95 |
The Ironclad Gunboat:
Designed by Herb Gundt of H.G. Walls. Can
be used for Space 1889. It consists of 8 pieces; lower hull, deck, upper
hull, bridge/engine room, smoke stack, lower ram, and 2 propellers. It is
about 13" long, 5 1/4" wide and 5" high. It weights about
30 oz. Comes unpainted. Side rails not included. |
|
|
MTW |
$48.00 |
Temporarily out of stock!
Martian Tri-pod Walker:
Designed by Herb Gundt. The body is made of light resin with 3 metal legs.
The
main body is in two parts and is made of light resin. Easy to
Assemble! A MUST for sci-fi gaming!! Does not come painted and
requires some assembly.
|
|
|
|
RY-1 |
$24.00 |
Yacht 1680-1750
Special Order Item |
|
|
|
RL-1 |
$18.00 |
Lugger 1550-1850
Special Order Item |
|
|
WC-200 |
$1.60 |
Controls for VSF ships |
|
 |
LWC1 |
$5.00 |
Armstrong
Light 6 pdr on naval mount with shield. Invented for Aeroscaphs. Comes unpainted and some assembly required |
|
|
LWC2 |
$5.00 |
US 1.75 Twin
auto cannon. Invented for Aeroscaphs. Comes unpainted and some assembly required. |
|
 |
MK I |
$25.00 |
Cruiser
Class Land Ship. Made of light resin, metal tracks and comes unpainted.
Shown with a Parroom Station Minion. |
|
 |
MK II |
$16.50 |
Corvette
Class Land Ship. Unpainted light resin body with metal tracks.
This is a VSF steam-powered
"Machine-gun" carrier. It's a relatively small vehicle with a
3-barreled MG mounted on top. The top has large opening hatches, which
when
open, provide some side cover for the gun crew.
This photo shows a Parroom Station
Minion and both were painted by Ken Hafer. |
|
 |
MK III |
$35.00 |
GulayGoRod
mobile wheeled casement. Is made of light weight resin with some
metal. Comes unpainted and unassembled.
Shown with Parroom Station Minions
and painted by Ken Hafer.
|
|
 Unpainted |
MK IV |
$6.50 |
Upright
steam boiler and firebox. Can be added to the top of boats and other
various vehicles. Comes unpainted as shown, in a light weight durable resin. |
|
 |
MK V |
$20.00 |
Steam powered armored car with Gatling gun. Comes unpainted in a light weight durable resin. |
|
 |
MK VI |
$20.00 |
Traction Engine. Made of light resin and metal. Has coal box on back. Comes unpainted. Easy to assemble. |
|
  
Three different views of the Traction Engine and Trailer . The trailer can transport lots of crew and the Engine can hold several figures. The engine has controls for steering. Both come unpainted and are sold separately. |
 |
MK VII |
$16.50 |
Trailer for Traction Engine. Comes unpainted. |
|
  |
MK VIII |
$36.00 |
Leviathon Class Steam Battle Strider (tri-pod). Made of metal, top is removable, has hatch, two gun portals, turret swivels 360°, holds up to 6 figures or more, comes with instructions. Unpainted. Photos show inside of turret with top removed and fully assembled. |
|
